Provisioning Cyberdata V3 Paging Device as a NightRinger Device
===============================================================

RingCentral has 2 provisioning types for your Cyberdata V3 Paging Device. This article describes the steps to provision the Cyberdata V3 paging device as a NightRinger device.

Requirements:
-------------

• Requires a [DigitalLine](https://support.ringcentral.com/article-v2/Phone-Numbers-DigitalLine-Overview.html?brand=RC_US&product=RingEX&language=en_US "") . This means that the device incurs full cost of a DigitalLine.

• Allows utilization of pre-recorded pages.

• Paging device is accessible by anyone who knows the extension or phone number associated with the device.

• Access to both service.ringcentral.com, and the Cyberdata IP Interface are required to proceed.

1. Access the Cyberdata IP Interface. The **IP address** can be retrieved by connecting an analog phone or paging speakers to the Paging server and quickly pressing and releasing the RTFM switch located on the rear of the device. For more information on how log in to your Cyberdata's User Interface, you may visit [Cyberdata's Troubleshooter page](https://support.cyberdata.net/index.php?/Troubleshooter/List "") or [Cyberdata's Knowledgebase page](https://support.cyberdata.net/index.php?/Knowledgebase/Article/View/423/10/cyberdata "") .

**Default Username: admin**

**Default Password: admin**

• In a separate tab or window, [Log in as an Administrator to your RingCentral Online Account](https://support.ringcentral.com/article-v2/Signing-in-to-RingCentral.html?brand=RingCentral&product=RingEX&language=en_US "") .

2. Assign the NightRinger device to an extension. This can be done in 2 ways:

• [Assign an existing device to an existing extension](https://support.ringcentral.com/article-v2/Provisioning-Assign-an-existing-device-to-an-existing-extension.html?brand=RC_US&product=RingEX&language=en_US "") .

• Add a new extension and assign the existing device.

3. Go to **Phone System \> Phones \& Devices** .

4. Under **User Phones** select the Line that you will be using to configure the **Nightringer** function. Click **Setup and Provision** .

5. Select **Other Phone** , and then click **Select** under **Existing Phone** .

6. You will be able to see the **Provisioning information** needed to configure the Nightringer function of your Cyberdata Paging device.

**NOTE** : Select the **Outbound Proxy** based on the location of your device then copy the **SIP settings**

![User-added image](https://assets.ringcentral.com/content/dam/xml-assets/sf-migration/en_US/RC_US/RingCentral_MVP/Provisioning-Cyberdata-V3-Paging-Device-as-a-NightRinger-Device/images/ka12H000000HNEwQAO_en_US_4_0.png)

7. Open the **Cyberdata Paging device's User Interface** , and then click the **Nightringer** tab. Insert the following Provisioning information:

|         Cyberdata UI         |                  RingCentral Provisioning Information                  |
|------------------------------|------------------------------------------------------------------------|
| **Enable** **Nightringer**   | Tick the box for Enable Nightringer.                                   |
| **SIP Server**               | **SIP Domain** (Do not include the port assignment on the end)         |
| **Remote SIP Port**          | **SIP Domain port assignment**                                         |
| **Local SIP Port**           | automatically set (Default is 5061)                                    |
| **Outbound Proxy**           | **Outbound Proxy** (Do not include the port assignment on the end)     |
| **Outbound Proxy Port**      | **Outbound Proxy port assignment**                                     |
| **User ID**                  | **User Name**                                                          |
| **Authenticate ID**          | **Authorization ID**                                                   |
| **Authenticate Password**    | **Password**                                                           |
| **Re-registration Interval** | **30**                                                                 |
| **Keep Alive Period**        | **0**                                                                  |
| **Force Codec Selection**    | Tick the checkbox for the **Force Codec Selection** and use **PCMU** . |

![Nightringer Configuration](https://assets.ringcentral.com/content/dam/xml-assets/sf-migration/en_US/RC_US/RingCentral_MVP/Provisioning-Cyberdata-V3-Paging-Device-as-a-NightRinger-Device/images/ka12H000000HNEwQAO_en_US_4_1.png)

8. Click **Save** and **Reboot** to store changes.