Access, service, and grow your account from here.
Search
Contact us
Save time by chatting, available online 24/7.
Submit a case
The most direct way to match you to the right expert on your issue. Responses within 48 hours.
Contact us
FOR SALES
1 (888) 898-4591
FOR SUPPORT
1 (888) 898-4591
Search resources
Submit a case
Contact us
FOR SALES
FOR SUPPORT
Welcome to MyRingCentral
Hi, ${extension.contact.firstName}!
Welcome to MyRingCentral
Hi, ${extension.contact.firstName}!

Set up your VoIP phone

Follow these steps to set up your Voice over Internet Protocol (VoIP) phone.
1. Assemble your phone.
  • Assemble the phone components following the manufacturer's instructions included with your device.
  • Connect the handset to the phone base using the handset cord. Make sure to connect the handset cord to the handset port on the phone base and not the headset port. 
Go to Desk Phones for RingCentral for more information on how to assemble your phone.
2. Plug into a power source. 
Your phone can receive power either through the power adapter included with the phone, or by using Power over Ethernet (PoE). RingCentral recommends connecting to your network with an Ethernet cable due to the varying reliability of WiFi signals.
  • If you're using the power adapter, plug the adapter into a standard wall outlet and the other end into the phone's power port.
  • If using PoE, skip to Step 3.
3. Connect to the internet.
Using the Ethernet cable, connect the phone's network port to the network port on your router or network wall outlet that connects to the Internet.
  • If you're using Power over Ethernet (PoE) to power the phone, make sure the PoE switch is connected to the network.
  • You can also connect using WiFi under the phone settings menu if it is supported by your phone.
Your phone comes with a default password set by the manufacturer. We strongly recommend that you change the password to a unique strong password that isn’t easy to guess.
Review all default settings to confirm they align with your organization's policy and industry best practices.
4. Confirm your phone is online and active.
  • A fully activated online phone will display the assigned extension’s profile name on the phone’s screen, and the date and time set on the extension.
  • For unassigned phones and phones purchased in advance, the display will show Phone User Removed or an abbreviation of this. You’ll need to assign the unassigned phone to a user extension.
5. Make a test call
Call any number. If you hear a dial tone and can place a call, your phone has been set up successfully.
Additional resources
Helpful links
© 2022 RingCentral, Inc. All rights reserved.
Thanks!
We've sent you a link, please check your phone!
Please allow a full minute between phone number submissions.
There was an issue with SMS sending. Please try again. If the issue persists, please contact support.